FULL-DUPLEX WIRELESS INTERCOM
AI noise cancellation. Nine voices. Ready when you power on.
WHY CoMo II
Powered by dual-microphone ENC and AI ENC, CoMo II reduces environmental noise for clear, real-time communication. One host headset supports up to eight remote headsets, enabling communication for teams of up to 9 people — with a line-of-sight range of up to 1312 ft (400 m), automatic reconnection, and over 10 hours of battery life.
IN THE FIELD
A single host headset supports up to eight remote headsets — communication for teams of up to 9 people, without a base station.
Fig. 1 host headset + 8 remote headsets, one net
Place the microphone boom at ±45° to mute; push it forward to 45° to talk. Maximum rotation angle of the boom shaft is ±118°.
Fig. 2 flip-to-mute boom with foam windscreen
Full duplex real-time audio communication, with industry-leading wireless stability for easier real-time communication.
Fig. 3 crew member on a live production
Up to 1312 ft (400 m) line-of-sight transmission range. If a connection drops, bring the headsets back within range and the remote headsets reconnect to the host automatically.
Fig. 4 camera operator, line-of-sight range test configuration


MEASURED, NOT CLAIMED
1312 ft / 400 m
Range, line of sight without interference
9
People on one net — 1 host + 8 remote headsets
<170 g
Weight, including ear cushions and battery
1500 mAh
Replaceable battery per headset
CORE TECHNOLOGY
What makes CoMo II different?
01
CoMo II reduces environmental noise for clear, real-time communication in noisy production environments.
Learn More ›
02
Both ends speak and listen at the same time. Powered by dual-microphone ENC and AI ENC for clear, real-time communication.
Learn More ›
03
A single host headset can store pairing information for up to 8 remote headsets. Pairing a new remote headset does not affect the connection status of previously paired remote headsets.
Learn More ›
04
Mute at ±45°; the boom shaft rotates up to ±118°. Lift up to turn the microphone off, put it down to turn it on.
Learn More ›
05
Ergonomic headset design, compatible for both left ear and right ear wearing.
Learn More ›
01
CoMo II reduces environmental noise for clear, real-time communication.
Learn More ›Slide the ENC switch to ON to enable, OFF to disable. Voice prompts confirm: “Noise cancelling on” / “Noise cancelling off”.
Learn More ›16KHz/16-bit sampling rate, 150Hz~7KHz frequency response.
Learn More ›02
Pre-paired at the factory. Power on, then talk — no base station or setup required for the included host and remote headsets.
Learn More ›Run multiple host-remote systems simultaneously in the same venue — built for parallel crews and expanding production teams.
Learn More ›03
Multi-function button mutes and unmutes the microphone. Volume + / − set volume level 1–7, default 4.
Learn More ›Connect a compatible third-party CTIA headset for external monitoring in demanding production environments. The built-in microphone and speaker automatically disable when connected.
Dual-microphone ENC is disabled while an external headset is connected.
Learn More ›A Button (Reserve) and B Button (Reserve) are provided for future firmware functions.
Learn More ›04
Remote headset: 17 hours. Host headset: 17 hours (1 remote in connection), 11 hours (7 remotes in connection).
Learn More ›Insert the battery in the correct orientation until a firm “click” indicates it is locked in place. Press and hold the battery lock to remove.
Learn More ›The charger supports power input from USB PD chargers. Charging: white LED flashes. Fully charged: white LED stays on steadily.
Learn More ›PACKING LIST




| Kit | Host | Remote | Batteries | Chargers | Cushions / Windscreens / Bags |
|---|---|---|---|---|---|
| 1 host + 8 remotes | 1 | 8 | 18 | 2 | 9 / 9 / 9 |
| 1 host + 6 remotes | 1 | 6 | 14 | 2 | 7 / 7 / 7 |
| 1 host + 4 remotes | 1 | 4 | 10 | 1 | 5 / 5 / 5 |
| 1 host + 2 remotes | 1 | 2 | 6 | 1 | 3 / 3 / 3 |
| Single headset | 1 | — | 2 | — | 1 / 1 / 1 |
Every kit also includes User manual × 1. Cushions / Windscreens / Bags counts follow the manual's packing list.
NOTES & DISCLAIMERS
SPECIFICATIONS
| Item | CoMo II |
|---|---|
| Modulation | GFSK |
| Receiving Sensitivity | <-93dBm |
| Sampling Rate | 16KHz/16-bit |
| Frequency Response | 150Hz~7KHz |
| Signal-to-noise Ratio | >65dB |
| Input SPL | >128 dB SPL |
| Output SPL | Typical Value 96±3dB SPL |
| ENC | Dual Mic ENC and AI ENC |
| Range | ≥1312ft / 400m (line of sight without interference) |
| Remote headsets per host | Up to 8 |
| Team size | Up to 9 people |
| Reconnection | Automatic, when the signal is restored |
| External jack | 3.5mm External Headphone or Microphone Jack (CTIA) |
| Battery Capacity | 1500mAh |
| Operating Time — Remote headset | 17 hours |
| Operating Time — Host headset (1 remote in connection) | 17 hours |
| Operating Time — Host headset (7 remotes in connection) | 11 hours |
| Weight | <170g(including ear cushions and battery) |
| Dimensions | 182 x 170 x 78 mm |
| Operating Temperature | -10°C~45°C |
| Storage Temperature | -20°C~55°C |
FAQ
If the host headset is powered off, or the distance between the host and remote headsets is too far, the remote headsets will be disconnected from the host. When disconnection occurs, power on the host headset or bring the host and remote headsets back within communication range. The remote headsets will automatically reconnect to the host.
The host and remote headsets are pre-paired at the factory and require no additional pairing, they are ready to use immediately after power-on. Pairing is only necessary when adding a new headset to an existing set.
Press and hold the multi-function button on both the host and remote headsets for 3 seconds to enter pairing mode. A voice prompt “Pairing” will sound, and the indicator will switch to pairing status. The host pairing duration is set to 120 seconds.
Yes. Multiple host-remote headset systems can be used simultaneously in the same environment.
If your host headset has already memorized 8 remote headsets, the existing pairing memory must be cleared before pairing new remote units. Switch the host headset ON, then press and hold both the volume up “+” and down “-” button for 3 seconds. The pairing memory erasing process takes approximately 10 seconds.
CoMo II features a standard 3.5mm CTIA headset jack. Once connected, the built-in microphone and speaker are automatically disabled, and dual-microphone ENC is disabled. This is suitable for noisy environments or work scenarios that require binaural monitoring.
User Manual v1.0 — check the latest version on the official Accsoon website.
https://accsoon.com/download-center/